金年会 金字招牌诚信至上

The technical data is concluded based on the inside experiment and production results of our company．Users ought to have a full understanding of whether it fits the requirements before using and carry out enough experiments on the printing materials to guarantee the correct use of products.

1. Ink is flammable chemicals. Please stay away from fire during transportation and utilization. Make sure the safety precautions for fire and static electricity are taken. Store the ink in somewhere ventilated and cold.

2. Ink is liquid mixture and should be mixed well before using.

3. This product is not suitable to be mixed with other kinds of ink in case of printing disabilities. The quality guarantee period is  12 months while the period for golden, silver and pearly-lustre ink is 3 months.

4. Full consideration of relative requirements in national standards has been taken into the formula, design, solvent and addition solvent of this product.

Reminders:

The involved data is concluded based on the inside experiment and production results of our company．As many differences and uncertainty exist in the factors as printing conditions, processing processes, printing base materials, humidity and temperature, the data is not the basis of the quality. No relevant responsibility is taken for the consequences of product processing and application. Adequate and necessary experiments should be carried out before using. Please contact our technology personnel if you have any further question.

1. Recommended dilution proportion

2. The setting for ink color

3. Printing viscosity

According to the depth of printing plate and the speed of printing machine, the recommended viscosities are:

White ink:12-15s/zahn cup 3#（25℃）

Colored ink:13-18s/zahn cup3#（25℃）

4. Reminders

The using reminder of ink mark:

Ink with S mark can only be used for lighting packaging without boiling or stewing.

Ink with F mark can only be used for the boiling requirements below ≤100℃.

Ink with R mark can be used for all packages. The using scope ofdetailed numbers is available in INK SETTING.

We do not recommend to use gold and silver ink for boiling and stewing products. Please test to confirm if needed.

Light permeation of F101耐晒桃红 would appear when used for the stewing and boiling of NY membrane. Please confirm if it conforms to the requirement of your company first.

Reminders for nylon thin membrane:

Under common circumstances, when printed nylon membrane is used for

leisure food packaging, solidification solvent is not required for boiling and stewing at 121℃.Special requirements and craft require arather high mixed strength (above the national standard). So, it issuggested to add 1%-3% R10# solidification solvent to bottom white ink to achieve stable mixed strength. At room temperature, the ink with solidification solvent can be used continually for over 72 hours. Please add another 1%-3% solvent and over one half new ink when reusing the old ink.

Under common circumstances, TZA-8 series ink does not need subsidiary solvent. 3-5% anti-sticking solvent could be added in disposal of thin membrane on both sides. However, over addition may influence the mixed performance.

Please carry out an experiment to confirm the matching performance with sticky solvent when used for boiling and stewing of PET and NY.